Transistor Optocoupler ORPC-817SC-H-EN-V11 ee Mitirrada Korontada

Astaamaha

1. Saamiga wareejinta hadda ( CTR : MIN. 300% at IF = 5mA, VCE = 5V )

2. Go'doomin wax-soo-galin sare (Viso = 5,000Vrms)

3. Waqtiga jawaabta (tr: TYP. 2.9 µs at VCE = 10V, IC = 2mA, RL = 100Ω)

4. Iyadoo la raacayo RoHS, heerarka REACH

5. ESD kaadhka HBM 8000V/MM 2000V

6. Fasalka MSL Ⅰ

7. Oggolaanshaha badbaadada

UL ogolaaday (No.E323844) VDE waa la ansixiyay (No.40029733)

CQC waa la ansixiyay (No.CQC09001029446) CE waa la ansixiyay (No.AC/0431008)

Shabakadda Gobolka waa la ansixiyay (No.SGCM013420170152)

 

Sharaxaada

1. ORPC-817SC-H sawirqaade wuxuu ka kooban yahay hal gabal oo GaAs emitter ah iyo hal gabal oo NPN transistor ah.

2. Waxay ku jiraan xidhmo 4-pin ah oo DIP ah iyo SMD .

 

Codsiyada

1. Beddelida sahayda korontada
2. Ammeter
3. Kumbuyuutar

4. Codsiga qalabka, mashiinka cabbiraadda

5. Qalabka kharashka, mishiinka nuqulka, otomaatiga ah

6. Qalab koronto oo qoysku isticmaalaan, sida taageereyaasha

7. Nidaamyada beddelka calaamadaha

8. Qiimaynta ugu saraysa ee Ta=25℃

 

Parameter		Astaanta	Qiimaha la qiimeeyay	Cutubka
Gelida	hore u socda	HADDII	50	mA
	hadda ugu sarreeya hore (100μs garaaca, 100Hz inta jeer)	IFP	1	A
	Voltage roga	VR	6	V
	Isticmaalka Awoodda	P	70	mW
Soo saarida	Ururiyaha iyo Voltage emitter	VCEO	80	V
	Emitter iyo Voltage aruuriyaha	VECO	7
	Ururiyaha hadda	IC	50	mA
	Isticmaalka Awoodda	PC	150	mW
Wadarta awooda isticmaalka		Ptot	200	mW
*1 Korontada dahaarka		Viso	5,000	Vrms
Xakamaynta ugu badan ee Voltage (Tijaabada Saliida Insulating)		VIOTM	10,000	V
Voltage Insulation Insulation Oo La Qiimeeyay		VIORM	630	V
Heerkulka shaqada		Sare	-55 ilaa +110	℃
Heerkulka dhigaalka		Tstg	-55 ilaa +125
*2 Heer kulka iibka		Tsol	260

1. *1.AC 1 daqiiqo, R.H. = 40 ~ 60%
2. Korontada go'doominta waa in lagu cabbiraa iyadoo la adeegsanayo habkan soo socda.

• 1. Gaaban oo u dhexeeya anode iyo cathode oo ah dhinaca hore iyo inta u dhaxaysa ururiyaha iyo hawada sare ee dhinaca sare.

  2. Tijaabada korantada go'doominta ee leh wareegga eber waa in la isticmaalaa.

  3. Qaabka mawjadaha korantada la dabaqay waa inay noqotaa mawjad sine ah.

1. *2. Waqtiga iibku waa 10 ilbiriqsi
2. Tilmaamaha Electro-Optical (Ta=25℃ ilaa si kale loo cayimo mooyee)

 

Parameter		Astaanta	Min	Nooca.*	Ugu badnaan	Cutubka	Xaalada
Gelida	Korantada Hore	VF	1.0	---	1.3	V	IF=10mA
	u laabo hadda	IR	---	---	5	μA	VR=5V
	Awood ururiyaha	Ct	---	30	250	pF	V=0, f=1KHz
	Ururiyaha si uu hadda u soo saaro	ICEO	---	---	50	nA	VCE=24V IF=0mA
	Ururiyaha iyo Emitter attenuation Voltage	BVCEO	80	---	---	V	IC=0.1mA IF=0mA
	Emitter and Attenuation Attenuation Voltage	BVECO	7	---	---	V	IE=0.1mA IF=0mA
Waxka bedelka Astaamaha	*1 saamiga beddelka hadda	CTR	300	---	600	%	IF=5mA VCE=5V
	Ururiyaha hadda	IC	15	---	30	mA
	Ururiyaha iyo Emitter Saturation Voltage	VCE(fadhi)	---	0.1	0.2	V	IF=20mA IC= 1mA
	Culays	Riso	1×1012	---	---	Ω	DC500V 40~60%R.H.
	Awoodda Sabaynta	Cf	---	0.6	1.0	pF	V=0, f=1MHz
	Joogitaanka Joojinta	fc	---	80	---	kHz	VCE=5V IC=2mA RL=100Ω, -3dB
	Wakhtiga kor u kaca	t	---	2.9	10	μs	VCC=10V IC=2mA RL=100 Ω
	Waqtiga soo degista	tf	---	4.5	10	μs
	Wakhtiga Furitaanka	tan	---	6.3	10	μs
	Waqtiga daminta	dusha	---	7.1	10	μs

1. *1 Saamiga Beddelka Hadda = IC / IF × 100% , CTR Tolerance: ± 3%.
2. Shaxda Darajada ee Saamiga Wareejinta Hadda

 

Saxiixa darajada	Xaalada Imtixaanka	Min (% )	ugu badnaan (% )
C3	IF=5mA, VCE=5V, Ta=25℃	300	450
	IF=2mA, VCE=5V, Ta=25℃	210	400
	IF=1mA, VCE=5V, Ta=25℃	140	300
D1	IF=5mA, VCE=5V, Ta=25℃	300	500
	IF=2mA, VCE=5V, Ta=25℃	210	420
	IF=1mA, VCE=5V, Ta=25℃	140	320
D2	IF=5mA, VCE=5V, Ta=25℃	400	600
	IF=2mA, VCE=5V, Ta=25℃	280	500
	IF=1mA, VCE=5V, Ta=25℃	200	450
D3	IF=5mA, VCE=5V, Ta=25℃	450	600
	IF=2mA, VCE=5V, Ta=85℃	300	500
	IF=1mA, VCE=5V, Ta=85℃	210	450

Dalabka Macluumaadka

Lambarka Qaybta

ORPC-817SC-H-TU-V-W-Y-Z

Xusuusin

817SC-H = Qaybta Nambarka

T = Darajada CTR (C1, C3, D, D1, D2, D3 ama midna)

U = Qaabka hogaanka (S, M ama midna ).

V = Xulashada cajalad iyo gariir (TP, TP1 ama midna).

W = Xulashada qaabka hogaanka (F: Iron, C: copper)

Y = 'V' code ee badbaadada VDE (Doorashadan lagama maarmaan maaha). Z = 'G' code ee Halogen bilaash ah (Doorashadan lagama maarmaan maaha).

• VDE Koodhka waa la dooran karaa.

• Halogen Free ayaa la dooran karaa

Doorashada	Sharaxaada	Tirada xirmooyinka
Midna	Heerka DIP-4	100 unug tube kasta
M	Laabashada rasaasta ballaaran (0.4 inch masaafada)	100 unug tube kasta
S(TP)	Foomka dusha sare ee rasaasta rasaasta ( muuqaal hoose) + TP tape & ikhtiyaarka gariirada	2000 unug halkii giraan
S(TP1)	Foomka dusha sare ee rasaasta rasaasta (muuqaalka hoose) + TP1 tape & ikhtiyaarka gariirada	2000 unug halkii giraan

 

Xeerka Magacaabista

1. Soo saaraha: ORIENT.

2. Lambarka Qaybta: 817SC-H.

3. Koodhka darajada : Darajada CTR

4. Koodhka qaabka ledhka :'F' macnaheedu waa Bir,'C' macnaheedu waa Copper.

5. Xeerka sanadka : '0' macneheedu waa '2020' iyo wixii la mid ah.

6. Xeerka toddobaadka : 01 macneheedu waa toddobaadka koowaad, 02 macnaheedu waa toddobaadka labaad iyo wixii la mid ah.

7. Koodhka maalinta : 'A to F' macnaheedu waa 'Isniin ilaa Axad'.

8. VDE Code . (Ikhtiyaar)

9. HF Code : Halogen bilaash ah. (Ikhtiyaar)

10. H : Koodhka Xawaaraha Sare.

11. Anode.

    • Halogen Free Summada waa la dooran karaa.

    • VDE calaamad waa la dooran karaa.

 

Cabbirka Xidhmada (Cutub : mm ）

DIP

 

DIP&M

1. 

SOP

 

Lagu taliyay Qaababka Daabacaadda Cagta (Mount Pad)(Unit:mm)

 

Cabbirrada duubista

1. ORPC-817SC-H-TP

• 1. ORPC-817SC-H-TP1

Sharaxaada	Astaanta l	Cabbirka mm (inji)
Cajalad ballaaran	W	16±0.3 (.63)
4651040	P0	4±0.1 (.15)
Fogaanta qolka	F	7.5±0.1 (.295)
	P2	2±0.1 (.0079)
Fogaanta qolka ilaa qolka	P1	8±0.1 (.472)

Nooca Xidhmada	TP1/TP
Tiro (kumbuyuutar)	2000

1. Cabirka Xidhmada

2. cabbir xirmo

3. Nooca DIP

Macluumaadka xidhidhka
Nooca xirmada	Tube
Qty tube kasta	100pcs
Sanduuq yar (Gudaha) Cabirka	525*128*60mm
Sanduuqa Wayn (Dibadda) Cabirka	545*290*335mm
Qaddarka Sanduuqa Gudahaba	5,000pcs
Qadarka sanduuq kasta oo dibadda ah	50,000pcs

 

Nooca SOP

Macluumaadka xidhidhka
Nooca xirmada	Nooca giraangiraha
Balaadhka Cajaladda	16mm
Qty per Reel	2,000pcs
Sanduuqa yar (gudaha) cabbirka	345*345*58.5mm
Sanduuqa Wayn (Dibadda) Cabirka	620x360x360mm
Ugu badnaan qty sanduuqii yar	4,000pcs
Ugu badnaan qty sanduuqii weyn	40,000pcs

 

Tusaalaha Summada Xidhmada

1. Xusuusin:

2. Xeerka Qalabka: Aqoonsiga Alaabta.

3. P/N: Waxa ku jira "Macluumaadka Dalabka" ee qeexitaanka.

4. Lot No.: Xogta alaabta.

5. D/C: Todobaadyada Alaabta.

6. Tirada: Tirada baakadaha.

7. Tijaabada Kalsoonida

 

Profile Heer kulka iibka

1. Alxanka dib u qulqulaya IR (JEDEC-STD-020C waafaqsan)
2. Hal mar oo dib u qulqulka alxanka ayaa lagula talinayaa gudaha xaalada heerkulka iyo astaanta wakhtiga hoos lagu muujiyey. Ha iibin wax ka badan saddex jeer.

Shayga xogta	Xaaladaha
Kuleyli hore Heerkulka ugu yar (T Smin) Heerkulka ugu badan (T Smax) - Waqtiga (daqadda ilaa ugu badnaan) (t)	150˚C 200˚C 90±30 sek
Aagga iibinta - Heerkulka (TL ) - Waqtiga (t L )	217˚C 60 sekan
Heerkulka ugu sarreeya	260˚C
Wakhtiga heerkulka ugu sarreeya	20 sekan
Heerka sare u kaca	3˚C / sek max.
Heerka hoos u kaca ee heerkulka ugu sarreeya	3~6˚C / sek
Waqtiyada dib u soo noqoshada	≤3

 

1. (2) alxanka hirarka (JEDEC22A111 waafaqsan)
2. Hal mar iibinta ayaa lagula talinayaa iyadoo lagu jiro xaalada heerkulka.

Heerkulka Waqtiga	260+0/-5˚C 10 sekan
Heerkul kuleyl hore Wakhtiga kulaylka kahor	25 ilaa 140˚C 30 ilaa 80 sekan

1. (3) . Gacmaha oo lagu iibiyo birta wax lagu iibiyo
2. Oggolow in la iibiyo ledhka qudha ee habsoco kasta. Hal mar iibinta ayaa lagula talinayaa.
3. Heerkulka
4. 380+0/-5˚C
5. Waqtiga
6. 3 ilbiriqsi ugu badnaan